Why Won’t My Homedics Air Purifier Turn On?

In the course of running your home or office air purifier, you’ll likely encounter some issues from mild to severe ones. For instance, what do you suppose it means when an air purifier won’t turn on?

There are two possible reasons why your air purifier won’t power up. Either the machine has developed a fault, or it’s not correctly plugged in. Confirm all possible connections and contact your product’s manufacturer if the issue isn’t resolved.

It can be quite frustrating when an essential home appliance such as an air purifier isn’t functioning properly. Keep reading this article to learn essential repair tips for your air purifier.

Why Is My Homedics Air Purifier Not Working?

Several possible factors are responsible for an air purifier’s breakdown or malfunctioning. To detect the exact problem, you’ll need to carry out some tests on your air purifier.

Here are some simple checks you can use to test if your air purifier is working:

Test Your Homedics Air Purifier’s Airflow

If you suspect that your air purifier isn’t working, one of the simplest ways to confirm is to test the airflow.

Most home air purifiers are designed with internal fans. The function of these fans is to pull air from your room into the system for filtration. After the air has been processed and screened for all harmful substances, the fans should blow back the clean air.

Your air purifier’s internal fan can also be used to detect the soundness of your device. Under normal healthy conditions, your unit’s fan shouldn’t overwork itself to draw in dirty air or release clean air. If it produces noisy sounds, it’s either your filter needs changing or there’s an underlying issue with your purification machine.

On the other hand, if your purification device makes no sound at all, that could also be a problem. There’s every chance your air purifier isn’t drawing sufficient air to provide you with the ideal air quality.

Inspect Your Homedics Air Purifier Filters

A bad filter could be another good reason for your air purifier’s malfunctioning or crashing. Air purifier filters do most of the purification work as your machine pulls in unclean air from your room. They trap different pollutants like mold spores, pet dander, pollen, and other harmful particles floating in the air.

With time, these filters will get cramped with the trapped particles, which will need to be changed. In addition, your air purifier’s filter will find it difficult to perform its job if it gets choked with dirt.

There are air purifiers that come with a filter maintenance indicator. The indicator should notify you when the filter needs replacement or when it gets bad. However, I’ll advise that you also perform a manual inspection from time to time.

The reason is that most of these so-called maintenance indicators are merely timers. At times they give off warning signals long after the recommended lifetime for your machine’s filter has expired.

Also, if you live in a densely polluted environment, you’ll need to replace your air purifier’s filter more often. This is because your filter will get clogged and worn out more quickly due to the increased workload. Hence, to keep your indoor air healthy and safe for breathing, your filter will require frequent replacement.

Some air purifiers designs come with multiple filters. If you’re using one of those, ensure to conduct regular filter checks, so you know when to replace any of them.

While inspecting your machine’s filter, check for dark spots or any discoloration. In general, once your filter looks dusty and swamped with dirt, you should clean it or get a new replacement. 

When you don’t change dirty filters, they reverse their role and become a source of air pollution. They blow back molds, bacteria, germs, viruses, and other unclean particles into your room.

Unfortunately, that your filter looks clean doesn’t always mean that your air is safe. Most airborne pollutants are too tiny and can’t be seen using the naked eye. 

These microscopic particles can damage your filter as well. This brings me to my next and final examination method.

A clean-looking filter doesn’t mean you’re off the hook, though. Many pollutants are too small to see, and any damage to the filter may be microscopic. This brings us to our third testing method: an air quality monitor.

Examine Your Air Purifier Using an Air Quality Monitor

Using an air quality monitor is a very efficient way of testing whether or not your air purifier is working. An air quality monitor should work for any air purifier.

To begin with, you’ll need to turn off your air purifier to determine the baseline reading of your air quality. Then, after getting the baseline reading, turn your air purifier back on.

Next, shut all doors and windows to prevent foreign air and particles from flowing in. This measure is necessary to eliminate all possible alterations to the test. Also, any improvement in the room’s air quality may be erroneously credited to your air purifier.

Place the air quality monitor close to your machine’s vent or your favourite hangout spot in the room. Within thirty minutes to an hour, your machine should completely filter the air in your room. However, should you observe no reasonable change in the quality of your room’s air after now, then your purifier is bad.

Note that the above duration isn’t always the case. Your room’s proportion and shape is the major determinant of a complete filtration process.

Using an air quality monitor doesn’t just work for testing the state of your air purifier. You can also use it to check how long it takes for your unit to filter the entire air in your room per time. That way, you don’t turn your machine off prematurely, assuming that it’s done with cleaning the air.

Using external air quality monitors is ideal even if your machine has an inbuilt air quality monitor. Unfortunately, some internal air quality monitors in air purifiers are often designed with inferior sensors that can produce incorrect readings. So you shouldn’t depend on them because they’re unreliable.

In addition, the air around your device will always be the purest in the room. This implies that the internal air quality monitor readings won’t always show the real quality of your indoor air.

Why Won’t My Homedics Air Purifier Turn On?

Just like most home appliances and smart gadgets, there are two possible reasons why your air purifier won’t come. It’s either your air purifier has developed a fault, or it’s not correctly plugged into the right places.

Try the following steps to determine the source of the problem. If it’s just connectivity issues, you can easily resolve that without professional assistance.

  • Check and confirm that your air purifier’s charger is securely plugged into the machine itself and then the wall switch.
  • Confirm that the power switch is working by plugging in another appliance in that particular switch. If the appliance doesn’t come on, the problem might be from the bad power outlet and not your purifier.
  • Inspect your HEPA filter to ensure it’s fitted correctly into the filter compartment. 

Should the problem persist after performing all the above checks, do well to contact your manufacturers for further support.

What if Your Control Panel Buttons Aren’t Responding?

Disconnect your air purifier by unplugging the charger from the power source. Afterwards, plug the purifier’s charger back into the switch. All the control panel button functions should return to normal.

How Do I Open My Homedics Air Purifier?

This is quite easy. Pull the tabs on both sides of the front panel. The front cover will snap open and pull forward, revealing the air purifier filter set.

Is It Hard to Fix My Homedics Air Purifier By Myself?

Fixing your air purifier unassisted will depend on the severity of the issue. For general maintenance and repairs, follow the steps below:

Disassemble Your Air Purifier:

  • Switch off your machine and unplug it. Press the release knobs to remove the pre-filters intake casing, then slide the filters out. Loose any screws keeping the filter casing together.
  • To access the unit fan, unscrew the bolts holding the core encasement together and split the jackets.
  • Twist or spin the locking knot at the end of the motor shaft to remove the fan. As part of the necessary precautions, cover your eyes with safety goggles while doing this. Also, apply caution when taking off the ring to avoid bending it.
  • Unscrew the bolts keeping the switch and the motor jacket together, Then gently pull the casing apart to reveal the motor. The switch module should slip out from the duct contained in the housing once you do this.

Clean Your Air Purifier Filters

  • Take out the inflow mesh from your air purifier.
  • Gently run a vacuum all over the filter through the mesh.

Replacing Your Machine’s Ionizer Cables

  • Disconnect your air purifier and pull out the ensuing chamber.
  • With the help of needle-nose pliers, detach the cable spring from the hook at both ends of the chamber. If necessary, press down the interlocking knob to release the wire.
  • Reverse this step to set up the new cable.